HP Kayak XA Installation Manual page 18

1 Installing Your Multimedia Sound Kit
Installing the Accessory Software under Windows 3.11
NOTE If your AUTOEXEC.BAT file includes the
Windows automatically), you must edit your AUTOEXEC.BAT file to
place
modification will allow the
Windows starts.
5 If you don't want to modify these files, type
6 When the procedure is complete, remove the floppy disk and restart
10 English
after the
WIN MSCDEX.EXE /D:MSCD0HP /M:12
If the CD-ROM drive is connected to the same cable as the hard
•
disk drive (that is, it is connected as a slave on the primary IDE
channel), the following two lines are added or modified in the
SYSTEM.INI file:
VirtualHDIRQ=Off
32BitDiskAccess=Off
The original CONFIG.SYS, AUTOEXEC.BAT, and SYSTEM.INI files
are saved under the new names CONFIG.ORG, AUTOEXEC.ORG,
and SYSTEM.ORG.
The installation program makes copies of the system files, adds the
lines described above (in step 4), and saves the new files as
CONFIG.NEW, AUTOEXEC.NEW, and SYSTEM.NEW.
your PC.
On start-up, the system reads the new system files and installs the
CD-ROM driver.
command (to start
WIN
command to be launched before
MSCDEX
N
line. This
and press .