Removing An External 3.5-Inch Drive - HP Compaq 6000 Pro MT Maintenance And Service Manual
Business pc
Hide thumbs
Also See for Compaq 6000 Pro MT:
- Maintenance & service manual (125 pages) ,
- Troubleshooting manual (67 pages) ,
- Hardware reference manual (67 pages)
Table of Contents
Advertisement
10.
Rotate the drive cage back down to its normal position.
CAUTION:
Figure 9-26
The system automatically recognizes the drive and reconfigures the computer.
Removing an External 3.5-inch Drive
CAUTION:
computer.
The 3.5-inch drive is located underneath the 5.25-inch drive. You must remove the external 5.25-inch
drive before removing the external 3.5-inch drive.
1.
Follow the procedure in
inch drive and access the 3.5-inch drive.
CAUTION:
the electrical outlet before proceeding.
Be careful not to pinch any cables or wires when rotating the drive cage down.
Rotating the Drive Cage Down
All removable media should be taken out of a drive before removing the drive from the
Removing an External 5.25-inch Drive on page 141
Ensure that the computer is turned off and that the power cord is disconnected from
to remove the 5.25-
Installing and Removing Drives 145
Advertisement
Table of Contents
