HP Compaq 6000 Pro MT Maintenance And Service Manual page 156
Business pc
Hide thumbs
Also See for Compaq 6000 Pro MT:
- Maintenance & service manual (125 pages) ,
- Troubleshooting manual (67 pages) ,
- Hardware reference manual (67 pages)
Table of Contents
Advertisement
6.
Rotate the drive cage to its upright position.
Figure 9-24
7.
Connect the SATA data cable to the white system board connector labeled SATA1.
8.
Route the data cable through the cable guides.
CAUTION:
cage when raising or lowering it. One is located on the bottom side of the drive cage. The other is
located on the chassis frame under the drive cage. Ensure that the data cable is routed through
these guides before connecting it to the optical drive.
9.
Connect the power cable (1) and data cable (2) to the rear of the optical drive.
Figure 9-25
144 Chapter 9 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
Rotating the Drive Cage Up
There are two cable guides that keep the data cable from being pinched by the drive
Connecting the Power and Data Cables
Advertisement
Table of Contents
