The system automatically recognizes the drive and reconfigures the computer.
Removing an External 3.5-inch Drive
CAUTION:
computer.
NOTE:
The 3.5-inch drive bay may contain a diskette drive or a media card reader.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front bezel
4.
Disconnect the drive cables, as indicated in the following illustrations:
a.
If you are removing a diskette drive, disconnect the data cable (1) and power cable (2) from
the back of the drive.
Figure 7-21
68
Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis
All removable media should be taken out of a drive before removing the drive from the
(Access Panel on page
(Front Bezel on page
Disconnecting the Diskette Drive Cables
(Preparation for Disassembly on page
48).
49).
47).