Smart Cover Lock; Locking The Smart Cover Lock; Unlocking The Smart Cover Lock; Using The Smart Cover Failsafe Key - HP Compaq 6000 Pro MT Maintenance And Service Manual

3. Select Security > Smart Cover > Cover Removal Sensor, and select the desired security level.
4. Before exiting, click File > Save Changes and Exit.

Smart Cover Lock

The Smart Cover Lock is a software-controllable cover lock featured on some HP computers. This lock
prevents unauthorized access to the internal components. Computers ship with the Smart Cover Lock
in the unlocked position.
CAUTION:
password prevents unauthorized access to the Computer Setup utility.
NOTE: The Smart Cover Lock is available as an option on some systems.

Locking the Smart Cover Lock

To activate and lock the Smart Cover Lock, complete the following steps:
1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart.
2. As soon as the computer is turned on, press
to enter Computer Setup. Press
NOTE:
press F10
3. Select Security > Smart Cover > Cover Lock > Lock option.
4. Before exiting, click File > Save Changes and Exit.

Unlocking the Smart Cover Lock

1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart.
2. As soon as the computer is turned on, press
to enter Computer Setup. Press
NOTE:
press F10
3. Select Security > Smart Cover > Cover Lock > Unlock.
4. Before exiting, click File > Save Changes and Exit.

Using the Smart Cover FailSafe Key

If you enable the Smart Cover Lock and cannot enter the password to disable the lock, you will need a
Smart Cover FailSafe Key to open the computer cover. You will need the key in any of the following
circumstances:
●
Power outage
●
Startup failure
●
PC component failure (such as processor or power supply)
●
Forgotten password
For maximum cover lock security, be sure to establish a setup password. The setup
If you do not press F10
before the computer boots to the operating system to access the utility.
If you do not press F10
before the computer boots to the operating system to access the utility.
F10 before the computer boots to the operating system
Enter to bypass the title screen, if necessary.
at the appropriate time, you must restart the computer and again
F10 before the computer boots to the operating system
Enter to bypass the title screen, if necessary.
at the appropriate time, you must restart the computer and again
Asset Tracking and Security 61