Rear Chassis Fan - HP Compaq 6000 Pro MT Maintenance And Service Manual

Business pc
Hide thumbs Also See for Compaq 6000 Pro MT:
Table of Contents

Advertisement

Rear Chassis Fan

1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Disconnect the fan control cable from the system board (CHFAN2).
4.
Remove the four silver Phillips screws that secure the fan to the chassis.
5.
Lift the fan out of the chassis.
To install the fan assembly, reverse the removal procedure. Be sure to orient the air flow out of the unit.
112 Chapter 8 Removal and Replacement Procedures Microtower (MT) Chassis
(Preparation for Disassembly on page
(Access Panel on page
77).
76).

Advertisement

Table of Contents
loading

This manual is also suitable for:

6000 - proliant - 128 mb ram

Table of Contents