Compaq Evo N115 Maintenance And Service Manual page 91

1. Prepare the computer for disassembly (Section 5.3).
2. Remove the LED cover (Section 5.8).
3. Remove the keyboard (Section 5.9).
4. Remove the two silver TM2.0 × 5.0 screws 1 that secure the
hinge covers to the base enclosure (Figure 5-19).
5. Lift the front edge of the hinge cover 2 until it separates from
the base enclosure.
Figure 5-19. Removing the Hinge Cover Screws
6. Position the display so it rests at a 90-degree angle in
relationship to the work surface.
Maintenance and Service Guide
Removal and Replacement Procedures
5–23