Where used:
1 Four screws that secure the optical drive front and rear alignment rails to the
base enclosure (documented in Section 5.22, step 3a)
2 One screw that secures the PC Card bracket and system board to the base
enclosure (documented in Section 5.22, step 3e)
Figure C-12. Torx M2.0 × 5.0 Screw Locations (Continued)
Maintenance and Service Guide
Table C-5
Torx M2.0 × 5.0 Screw (Continued)
Color
silver
Qty
Length
27
5.0 mm
Screw Listing
Head
Thread
Width
2.0 mm
4.5 mm
C–13