Removal and Replacement Procedures
1. Prepare the computer for disassembly (Section 5.3).
2. Turn the computer bottom side up with the front
facing forward.
3. Remove the black PM2.0 × 5.0 screw 1 that secures the
memory expansion compartment cover to the base enclosure
(Figure 5-9).
4. Swing the left side of the cover up and to the right until it
rests at an angle 2 .
5. Lift the cover straight up and remove it 3 .
Figure 5-9. Removing the Memory Expansion
Compartment Cover
✎
The memory expansion compartment cover is included in the
Plastics and Hardware Kit (spare part number 254121-001).
5–12
Maintenance and Service Guide