Installing the Memory Expansion
Compartment Cover
1. Reset the memory insulator
ensuring that all edges of the memory insulator are tucked inside the memory
expansion compartment (Figure 5-27).
2. Replace the memory expansion compartment cover
memory expansion compartment, then sliding it to the right
3. Secure the memory expansion compartment cover to the computer with a memory
expansion compartment cover security screw or a standard Torx T-10 screw.
Figure 5-27. Replacing the Memory Expansion Compartment Cover
over the installed memory expansion board(s),
1
by placing it flush over the
2
until it is seated.
3
Removal and Replacement Procedures
5-
31