Audio Board - Compaq Armada E700 Series Maintenance And Service Manual

5.14 Audio Board

1. Prepare the computer for disassembly (Section 5.3).
2. Remove all battery packs (Section 5.5).
3. Remove all hard drives (Section 5.6).
4. Remove the keyboard assembly (Section 5.10).
5. Remove the CPU cover (Section 5.11).
6. Remove the screw
system board. (Figure 5-39).
7. Partially lift up on the rear/right edge of the audio board
system board. Hold the board slightly above the base assembly.
8. Disconnect the microphone cable
Figure 5-39. Removing the Audio Board Screw and Disconnecting the Audio Board
9. Remove the audio board.
Reverse the above procedure to install the audio board.
that secures the audio board to the standoff mounted on the
1
from the audio board.
3
to disconnect it from the
2
Removal and Replacement Procedures 5-
43