Inserting A Hard Drive Into The Multibay - Compaq Armada E700 Series Maintenance And Service Manual

Inserting a Hard Drive into the MultiBay

If you are moving a hard drive from the hard drive bay to the MultiBay, remove the
hard drive from the hard drive tray. Refer to the "Removing a Hard Drive from the
Hard Drive Bay" section in this chapter for more information.
A 17-mm hard drive must be inserted into a Dual-MultiBay Hard Drive Adapter before
being inserted into the computer MultiBay. A 12.7-mm hard drive can be inserted into
either a Dual-MultiBay Hard Drive Adapter or an Armada MultiBay hard drive adapter
before being inserted into the computer MultiBay(s).
1. Save all work, exit all applications, and shut down the computer.
2. Push back and hold the slide tab
and 5-19).
3. Lower the hard drive
4. Slide the hard drive toward the connector
are seated.
Figure 5-18. Inserting a 17-mm Hard Drive into a Dual- MultiBay Hard Drive Adapter
5-20 Removal and Replacement Procedures
on the hard drive MultiBay adapter (Figures 5-18
1
into the adapter.
2
in the adapter until the connectors
3