Preparing The Computer For Disassembly; Undocking The Computer From The Compaq Expansion Base - Compaq Armada E700 Series Maintenance And Service Manual

5.3 Preparing the Computer for Disassembly

1. Undock the computer from the Compaq Expansion Base or Compaq
Convenience Base.
2. Disconnect power and external devices.
3. Remove battery packs inserted into the battery bay or MultiBay (Section 5.6).
4. Remove PC Cards.
If the computer is not docked in an Compaq Expansion Base or Compaq Convenience
Base, go to the "Disconnecting the Computer" section. If the computer is docked, go to
the "Undocking the Computer from the Compaq Expansion Base" or "Undocking the
Computer from the Compaq Convenience Base" section.
Undocking the Computer from the
Compaq Expansion Base
1. Unlock the Compaq Expansion Base keylock.
2. Shut down the computer
3. Close the computer.
4. Press the eject button
Compaq Expansion Base
Figure 5-3. Undocking the Computer from the Compaq Expansion Base
5. Slide the computer out of the Compaq Expansion Base.
. The computer separates from the docking connector on the
1
(Figure 5-3).
2
Removal and Replacement Procedures 5-3