Section 2: Introduction; Commentary - Grizzly G1026 Instruction Manual

SECTION 2: INTRODUCTION

Commentary

Grizzly Industrial, Inc. is proud to offer the Model
G1026 Shaper. The Model G1026 is part of
Grizzly's growing family of fine woodworking and
metalworking machinery. When used according
to the guidelines stated in this manual, you can
expect years of trouble-free, enjoyable opera-
tion.
The Model G1026 is intended for heavy-duty
professional use. This shaper features a 3 H.P.,
220V single-phase motor, magnetic power switch-
ing and full reversing capabilities. The Model
G1026 also features a precision-ground cast
iron table, hold-down springs, three spindles and
an extended table wing. This shaper is capable
of operating at two spindle speeds: 7,000 and
10,000 R.P.M., giving you a versatile shaper at a
reasonable price.
A number of optional accessories for the Model
G1026 are available. Please refer to the current
Grizzly catalog for more information.
We are also pleased to provide this manual with
the Model G1026. It was written to guide you
through assembly, review safety considerations,
and cover general operating procedures. It repre-
sents our latest effort to produce the best docu-
mentation possible. If you have any criticisms that
you feel we should address in our next printing,
please write to us at the address below:
Grizzly Industrial, Inc.
⁄ Technical Documentation
C
O
P.O. Box 2069
Bellingham, WA 98227
-6-
Most important, we stand behind our machines.
We have an excellent service department at your
disposal should the need arise. If you have any
service questions or parts requests, please call or
write to us at the location listed below.
Grizzly Industrial, Inc.
2406 Reach Road
Williamsport, PA 17701
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
Address after fall, 2001:
Grizzly Industrial, Inc.
1203 Lycoming Circle
Pennsdale, PA 17756
The specifications, drawings, and photographs
illustrated in this manual represent the Model
G1026 as supplied when the manual was pre-
pared. However, owing to Grizzly's policy of
continuous improvement, changes may be made
at any time with no obligation on the part of
Grizzly. Whenever possible, though, we send
manual updates to all owners of a particular tool
or machine. Should you receive one, we urge
you to insert the new information with the old and
keep it for reference.
Read the manual before
assembly and operation.
Become familiar with the
machine and its opera-
tion before beginning
any work. Serious per-
sonal injury may result
if safety or operational
information is not under-
stood or followed.
G1026 Heavy-Duty Shaper