Inventory - Grizzly G0603X Owner's Manual

Inventory

After all the parts have been removed from the
two boxes, you should have the following items:
Inventory: (Figure 8)
A. Model G0603X Planer (not shown) ............ 1
B. Infeed and Outfeed Extension Wings
(not shown) ................................................. 2
C. Dust Hood (not shown) .............................. 1
D. Insert Hardware Set ................................... 1
—Carbide Insert M15 x 15 x 2.5 .............. 10
—Flat Head Screws #10-32 x
E. Hex Wrenches 3, 4, 5, 8mm ................. 1 ea
F.
Open End Wrenches:
12 x 14, 17 x 19, 22 x 24mm ................ 1 ea
G. Standard Screwdriver ................................. 1
H. P0603X335 440V Conversion Kit
(not shown) ................................................. 1
I.
Hardware Bag (not shown) ........................ 1
For Dust Port:
—Button Head Cap Screws M6-1 x 12 ...... 8
—Lock Washers 6mm ................................ 8
—Flat Washers 6mm ................................. 8
For Table Extension Wings:
—Hex Bolts M12-1.75 x 50 ........................ 6
—Flat Washers 12mm ............................... 6
—Set Screws M10-1.5 x 20 ....................... 6
-14-
Qty
⁄ " ............. 10
1
Figure 8. Model G0603X small parts inventory.
2
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
Some hardware/fasteners on the inventory
list may arrive pre-installed on the machine.
Check these locations before assuming that
any items from the inventory list are miss-
ing.
E
D
NOTICE
G0603X 25" Extreme Series Planer
G
J
F