Section 4: Operations; Operation Safety; Table Handwheel - Grizzly G0603X Owner's Manual

SECTION 4: OPERATIONS

Operation Safety

Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
-24-

Table Handwheel

The Model G0603X table elevation can be adjust-
ed manually with the handwheel or with the power
controls.
Table elevation can be measured with the verti-
cal scale on the right side of the table, or with the
power controls. (See Power Controls on Page
25 for further explanation of the digital control
features.)
To adjust the table elevation using the
handwheel:
1. Push inward on the handwheel and rotate it
slowly until it engages with the indented shaft
behind it.
2. Continue to rotate the handwheel until the
table has reached the desired elevation as
indicated on the scale to the right of the
table.
Note: One rotation of the handwheel adjusts
the table ⁄ ".
1
32
3. Pull out on the handwheel to disengage it
from the adjusting mechanism.
Note: Any time you switch directions with the
handwheel, there will be a small amount of back-
lash—so the first crank of the handwheel after
switching directions will be slightly less than
However, as long as you move the handwheel in
the same direction during operation, backlash will
not be a factor.
The handwheel should be disengaged when
using the power mode of adjusting the table
elevation. Otherwise, the rapid rotation of
the handwheel could present a safety haz-
ard!
G0603X 25" Extreme Series Planer
⁄ ".
1
32