Section 3: Setup; Unpacking; Inventory - Grizzly G0505 Owner's Manual

This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Wear safety glasses dur-
ing the entire setup pro-
cess!
This machine and its com-
ponents are very heavy.
Get lifting help to move
heavy items.

Unpacking

Your machine was carefully packaged for safe
transportation. Remove the packaging materials
from around your machine and inspect it. If you
discover the machine is damaged, please imme-
diately call Customer Service at (570) 546-9663
for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
-10-

SECTION 3: SETUP

Inventory

The following is a description of the main compo-
nents shipped with your machine. Lay the compo-
nents out to inventory them.
Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
Inventory: (Figure 4)
A. Chip Deflector ............................................. 1
B. Knife Gauge ............................................... 1
C. Lock Washer 6mm ..................................... 1
D. Cap Screw M6-1 x 20 ................................. 1
E. Hex Wrench 5mm ....................................... 1
F.
Double-End Wrench 8mm .......................... 1
G. Cutterhead Elevation Crank ....................... 1
H. Rubber Machine Feet ................................. 4
A
Figure 4. Model G0505 inventory.
SUFFOCATION HAZARD!
Immediately discard all plas-
tic bags and packing materi-
als to eliminate choking/suf-
focation hazards for children
and animals.
Model G0505 (Mfg. since 4/04)
Qty
B
C
F
D
E
H
G