Table of Contents
Advertisement
General Information
Introduction
The HP 70205A and HP 70206A Installation and Verification Manual contains information
needed to install and verify operation of the HP 70205A and HP 70206A graphics displays.
For information on installing and verifying HP 70000 Modular Measurement Systems, refer to
the Installation and Verification Manual for your instrument (for example, spectrum analyzer).
This manual contains the following five chapters:
m Chapter 1, "General Information," describes both the HP 70205A Graphics Display and the
HP 70206A System Graphics Display and their accessories, gives electrostatic discharge and
packaging information, and lists Hewlett-Packard Sales and Service Offices.
= Chapter 2, "Installation," provides information for preparing a display for use and
configuring the display into HP 70000 Modular Measurement Systems.
m Chapter 3, "Specifications," lists display specifications and characteristics.
m Chapter 4, "Verification," contains tests required to verify display specifications.
m Chapter 5, "Troubleshooting," explains the probable cause(s) of faults and problems
indicated by front-panel fault indicators, and provides diagnosis and problem isolation
techniques to help resolve these problems.
Notation.
|
Throughout the HP 702054 and HP 70206A Installation and Verification Manual, softkey
labels are denoted as
Fixed-label keys are referred to as "hardkeys" and are denoted as
(TEXT). Hardkey labels on the HP 70205A differ slightly from hardkey labels on the larger HP
702064. For example, on the HP 70206A the display hardkey is denoted as (DISPLAY), while
the same hardkey on the HP 70205A the manual is abbreviated (psp). The key functions are
identical. The HP 70206A hardkey labels are used throughout this manual.
Modular Measurement Terms Used in This Manual
Understanding the following terms is essential to understanding the structural relationship of
the HP 70000 Modular Measurement System devices.
General information
1-1
Advertisement
Table of Contents
