Ricoh DSc535 General Settings Manual page 40

IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using network TWAIN Scanner with
IEEE 1394 interface cable.
For details about how to specify the settings, see "Interface Settings" and "File
Transfer".
Menu
Interface Settings/IEEE 1394 IPv4 Address
Interface Settings/IEEE 1394 DDNS Configuration
Interface Settings/IEEE 1394 Host Name
Interface Settings/IEEE 1394 Domain Name
Interface Settings/IEEE 1394 WINS Configuration
Interface Settings/IEEE 1394 IPv4 over 1394
Interface Settings/Network IPv4 Gateway Address
Interface Settings/Network DNS Configuration
Interface Settings/Network Effective Protocol
Note
❒ [IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
Reference
p.58 "Interface Settings"
IEEE 802.11b (wireless LAN)
This section lists the settings required for using network TWAIN Scanner with
IEEE 802.11b (wireless LAN).
For details about how to specify the settings, see "Interface Settings".
Menu
Interface Settings/Network Machine IPv4 Address
Interface Settings/Network IPv4 Gateway Address
Interface Settings/Network DNS Configuration
Interface Settings/Network DDNS Configuration
Interface Settings/Network Domain Name
Interface Settings/Network WINS Configuration
Interface Settings/Network Effective Protocol
Interface Settings/Network LAN Type
Interface Settings/Network Permit SNMPv3 Communication
Interface Settings/Network Permit SSL/TLS Communication
User Tool
User Tool
Network Settings
Setting Requirements
Neccessary
As required
As required
As required
As required
Neccessary
As required
As required
Neccessary
Setting Requirements
Neccessary
As required
As required
As required
As required
As required
Neccessary
Neccessary
As required
As required
1
31