Ricoh DSc535 General Settings Manual page 187

Facsimile Features
K
Specify End Receivers with destination keys, and then press [OK].
You can change the display to the fax destination, Internet fax destination,
and IP-Fax destination using the key on the left side of the display.
4
A reception station can also be registered as a group destination. In such a
case, a maximum of 500 parties including End Receivers 1-5 can be specified
in a group.
To register another End Receiver, repeat from step
L
To program a password, press [Password].
If you do not want to program a password, proceed to step
M
Enter a password, and then press [OK].
If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing
[OK], and then try again.
N
Re-enter the password, and then press [OK].
If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing
[OK], and then try again.
To change the password after pressing [OK], press [Change] and repeat steps
N
and , or press [Cancel] and repeat from step
O
Press [OK] twice.
P
Press [Exit].
Q
Press the {User Tools/Counter} key.
178
J
.
O
.
L
.
M