Ricoh DSc535 General Settings Manual page 30

Menu
Interface Settings/Network Permit SNMPv3 Communication
Interface Settings/Network Host Name
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒ When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3 / IMAP4 Settings].
❒ When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail
Communication Port].
Reference
p.58 "Interface Settings"
p.68 "File Transfer"
User Tool
SMTP Server
SMTP Authentication
POP before SMTP
Reception Protocol
POP3 / IMAP4 Settings
Administrator's E-mail Address
E-mail Communication Port
Program / Change / Delete E-mail
Message
Scanner Resend Interval Time
Number of Scanner Resends
Network Settings
Setting Requirements
As required
As required
Neccessary
As required
As required
As required
As required
As required
As required
As required
As required
As required
1
21