Rule - TP-Link SafeStream TL-R600VPN User Manual

TL-R600VPN
4.7.1

Rule

Choose menu "Access Control →Rule", you can configure the Internet Access Control to
manage Internet activities from LAN hosts in the next screen (shown in Figure 4-29).
Enable Internet Access Control: Enable or disable the Internet Access Control.
Default Filter Policy: Select a policy to allow or deny the packets matching the rules to pass
through the Router.
Rule Name: Display the name of the rule and this name is unique.
Host: Displays the hosts to which the rule takes effect.
Target: Displays the corresponding target of the rule.
Schedule: Displays the effective time of the rule.
Action: Display the actions of the router to deal with the packets.
Status: Displays the rule is enabled or disabled.
To add/modify an Internet Access Control entry:
Step 1: Click Add New.../Edit shown in Figure 4-29, you will see a new screen shown in Figure
4-30.
Step 2: Enter the Rule Name and select the Host, Target, Schedule, Action and Status.
TM
SafeStream Gigabit Broadband VPN Router User Guide
Figure 4-29
38