Rule List - TP-Link Archer C20 User Manual

Chapter 4

4. 12. 2. Rule List

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
• Description
• Egress Bandwidth
WAN port. The default is 0.
• Ingress Bandwidth
the WAN port. The default is 0.
• Status
• Modify
¾ To add a Bandwidth control rule:
1. Click
2. Enter the information as the figure shown below.
3. Click Save.
Downloaded from ManualsNet.com
Bandwidth Control and you can view and configure the Bandwidth Control rules.
- This is the information about the rules such as address range.
- This field displays the max and min upload bandwidth through the
- This field displays the max and min download bandwidth through
- This field displays the status of the rule.
- Click Modify/Delete
Add New.
search engine
to edit/delete the rule.
Configure the Router
50