TP-Link SafeStream TL-R600VPN User Manual page 80

TL-R600VPN
Note:
Your opposite side should call your WAN IP, which is displayed on the "Status" page.
Method two: Use DMZ Host
Login to the router, click the menu Forwarding→DMZ. On the DMZ screen, select "Enable",
and enter your IP address into the "DMZ Host IP Address" field (using 192.168.0.102 as an
example), then to click the Save button.
7. I want to build a WEB Server on the LAN, what should I do?
Because the WEB Server port 80 will interfere with the WEB management port 80 on the router,
you must change the WEB management port number to avoid interference. And then add a WEB
Server on your LAN. You can follow the steps below to proceed.
Step 1: To change the WEB management port number: Login to the router, click the menu
System Tools→Remote Management. On the Remote Management screen, enter a
port number except 80 (such as 88) into the "Web Management Port" field. Click Save
and the router will reboot.
TM
SafeStream Gigabit Broadband VPN Router User Guide
Figure 4
Figure 5
74