TP-Link SafeStream TL-R600VPN User Manual page 52

TL-R600VPN
Policy Name: Enter the unique name to the IPsec policy for identification and management
purposes.
Local Subnet: Enter the IP address range on your local LAN to identify which PCs on your
LAN are covered by this policy. It's formed by IP address and subnet mask.
Remote Subnet: Enter the IP address range on your remote network to identify which PCs
on the remote network are covered by this policy. It's formed by IP address and subnet mask.
Remote Gateway: Enter the Remote Gateway. It can be IP address or domain name.
Exchange Mode: Select the negotiation mode for the policy.
IKE Mode
Security Policy:
Authentication Algorithm:
SafeStream
Figure 4-41
IKE: The parameters for the VPN tunnel are generated automatically via
IKE negotiations.
Manual: All settings (including the keys) for the VPN tunnel are manually
input and no key negotiation is needed.
It is available when IKE is selected as the
negotiation mode. Select the Security Policy for
IPsec.
Select the Authentication Algorithm for IPsec
policy. The default value is "Auto".
TM
Gigabit Broadband VPN Router User Guide
46