Pptp Vpn Server; Server Settings - TP-Link SafeStream TL-R600VPN User Manual

TL-R600VPN
This page displays the connection status of the IPsec Policy. As Security Association is unidirec-
tional, an ingoing SA and an outgoing SA are created to protect data flows for each tunnel after
IPsec tunnel is successfully established. The ingoing SPI value and outgoing SPI value are dif-
ferent. However, the Incoming SPI value must match the Outgoing SPI value at the other end of
the tunnel, and vice versa. The connection status on the remote endpoint of this tunnel is as the
following figure shows. The SPI value is obtained via auto-negotiation.

4.9 PPTP VPN Server

Choose menu "PPTP VPN Server", the next submenus are shown below.
Click any of them, and you will be able to configure the corresponding function. The detailed
explanations for each submenu are provided below.
4.9.1

Server Settings

Choose menu "PPTP VPN Server→Server Settings", you can configure the parameters of the
PPTP Server in the next screen (shown in Figure 4-44).
PPTP Server – Enable or disable the PPTP Server.
TM
SafeStream Gigabit Broadband VPN Router User Guide
Figure 4-42
Figure 4-43
Figure 4-44
49