TP-Link SafeStream TL-R600VPN User Manual page 51

TL-R600VPN
IPSec: Enable or disable IPsec and click save to apply.
Policy Name: The unique name to the IPsec policy for identification and management
purposes.
Local Subnet: The IP address range on your local LAN to identify which PCs on your LAN
are covered by this policy. It's formed by IP address and subnet mask.
Remote Subnet: The IP address range on your remote network to identify which PCs on the
remote network are covered by this policy. It's formed by IP address and subnet mask.
Exchange Mode: The negotiation mode for the policy.
To add/modify an IPsec entry:
Step 1: Click Add New.../Modify shown in Figure 4-40, you will see a new screen shown in
Figure 4-41.
Step 2: Enter the Policy Name, Local Subnet, Remote Subnet, Remote Gateway, PFS Lifetime
and then select the Exchange Mode, Security Protocol, Authentication Algorithm, Encryption
Algorithm, IKE Security Policy, PFS Group. Then enable or disable the settings.
TM
SafeStream Gigabit Broadband VPN Router User Guide
Figure 4-40
45