Reboot - TP-Link TD-W8960N User Manual

2) Before upgrading the Router's firmware, you should write down some of your customized
settings to avoid losing important configuration settings of the Router.
3) Do not turn off the Router or press the Reset button while the software is being updated.
4) The Router will reboot after the Upgrading is finished.

4.7.7 Reboot

Choose "Management" "Reboot", you can see the screen (shown in Figure 4-107) which allows
you to reboot the Router.
Note:
1) After you clicked the Reboot button, please wait for a while before reopening your web
browser.
2) Do not turn off the Router or press the Reset button while the Router is rebooting.
3) If necessary, reconfigure your PC's IP address to match your new configuration.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide
Figure 4-107
91