Panel Layout; The Front Panel - TP-Link TD-W8960N User Manual

1.3 Panel Layout

1.3.1 The Front Panel

The Router's LEDs are located on the front panel.
The Router's LEDs and the QSS button are located on the front panel (View from left to right).
Name Status
Power
Flashing
Internet
ADSL
Flashing
WLAN
Flashing
LAN 1-4
Flashing
Slow Flash
QSS
Quick Flash
Note:
After a device is successfully added to the network by QSS function, the QSS LED will keep on for
about 5 minutes and then turn off.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide
Figure 1-1
Description
On Power is on
Off Power is off
On A successful PPP connection has been established
Data is being transferred over the Internet
There is no successful PPP connection or the Router
Off
works on Bridge mode
On The LINE port has connected to ISP's network
The LINE port is connecting to the ISP's network
Off The LINE port is disconnected
On The Wireless function is enabled
Sending or receiving data over wireless network
Off The Wireless function is disabled
There is a device linked to the corresponding port but there
On
is no activity
There is an active device linked to the corresponding port
Off There is no device linked to the corresponding port
A wireless device is connecting to the network by QSS
function. This process will last in the first 2 minutes.
A wireless device has been successfully added to the
On
network by QSS function.
A wireless device failed to be added to the network by QSS
function.
4