Connections; Before Connecting The Ac Cord - Aiwa CX-NA303 Operating Instructions Manual

Check your system and accessories
INSX-A3041
CX-NA303 Compact disc stereo cassette reciever
SX-NA302 Front speakers
* SX-R275 Surround speakers (For NSX-A304 only)
Remote control
AM antenna
FM antenna
m
Operating Instructions, etc
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is
120 V AC. Check that the rated voltage matches your local
voltage.
IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord in the end.
7 Connect the right and left speakers to the main
unit.
Connect the right speaker cord to SPEAKERS R terminals,
and left to SPEAKERS L terminals.
The speaker cord with the white stripe should be connected
to ~ terminal and the black cord to ~ terminal.
2 Connect the surround speakers to the main unit,
(only for NSX-A304)
There are no differences between the surround speakers.
Connect each surround speaker cord to SURROUND
SPEAKERS R or L terminal.
m
* Optional SX-R275 Surround speakers are available with the NSX-A304.
I
@k
1
Righ
I--'--J
2
/-
4
AC cord
Surround ;peaker cord
3
ENGLISH