Loading Discs; Playing Discs; To Check The Remaining Time; Selecting A Track With The Remote Control - Aiwa CX-NA303 Operating Instructions Manual

I
Press CD, then press A OPEN/CLOSE to open the
disc compartment. Load disc(s) with the label side
up.
To
play one or two
discs,
place the discs on tray 1 and 2.
To tdav three discs, press DISC CHANGE to rotate the trays
after placing two discs. Place the third disc on tray 3.
Close the disc compartment by pressing A OPEN/CLOSE.
Tray 1
DISC CHANGE~
Tray number of the
disc to be played Total playing time
Total number of tracks
Load discs.
To plav all discs in the disc com~artment, press -.
Play begins with the disc on tray 1.
Number of track being played
Elapsed playing time
To
dav one disc only press
DISC DIRECT PLAY
1-3.
The selected disc is played once.
To stop play,
press 1.
To pause play,
press 11. To resume play, press again.
To sesrch for a particular point during playback,
keep +
or > pressed and release it at the desired point.
To
skip to the beginning of a track during playback,
press
4 or * repeatedly or turn MULTI JOG.
To remove discs, press 4 OPEN/CLOSE.
To start play when the power is off (Direct Play Function)
Press CD. The power is turned on and play of the loaded disc(s)
begins.
When A OPEN/CLOSE is pressed, the power is also turned on
and the disc compartment is opened.
To check the remaining time
During play, press EDiT/CHECK on the remote control while
pressing SHIFT. The amount of time remaining until all tracks
finish playing is displayed. To restore the playing time display,
repeat the above.
Selecting a track with the remote control
1
Press DISC DIRECT PLAY 1-3 to select a disc.
2 Press numbered buttons O-9 and +1 O to select a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +1 O and 0.
The selected track starts to play and continues to the end of
that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting play.
1
Press DISC
CHANGE.
2
Remove the discs and replace with other discs.
3 Press A OPEN/CLOSE to close the disc compartment.
When loading an 8-cm (3-inch) disc, put it onto the inner circle
of the tray.
Do not place more than one compact disc on one disc tray.
Do not tilt the unit with discs loaded. Doing so may cause
malfunctions.
9
ENGLISH