Fujitsu FI-4860C Operator's Manual page 268

29. Confirming Imprinter installation
1) Press (Next button) or
<Screen29>.
[XXXX/XXXX], imprinter installation status is displayed as follows.
(1) Only fi-486PRFR is installed:
(2) Only fi-486PRRE is installed:
(3) Both fi-486PRFR and fi-486PRRE are
installed:
2) By pressing
7-62 7.3 Setup Mode Details
(Previous button) and let LCD display
<Screen29>
! I
2 9
S t t u
a
(Exit button), LCD display goes back to "Ready".
m p r t e
i n
s P o s t
[Pre]
[Post]
[Post/Pre]
r
/ P r e