Fujitsu FI-4860C Operator's Manual page 242

4) At <Screen9-1> , <Screen9-2>, <Screen9-3>, <Screen9-4> or <Screen9-5>, to
reset the corresponding counter, press
[Reset].
Press (Enter button) to confirm the selection, then <Screen9-6> is
displayed.
If you do not want to reset the counter, select [No] and press
button).
HINT
5) If you are sure to reset, select [YES] and press
To cancel Reset, select [No] and press
Press (Exit button) and the LCD display goes back to [Ready] screen.
7-36 7.3 Setup Mode Details
<Screen9-6>
! 0 9 -
x x x
[XXXXXX] is the counter value of the selected consumable.
− Pick roller counter
− Brake roller counter
− Pad counter
− Front-side lamp counter (lamp-on time)
− Back-side lamp counter (lamp-on time)
(Left arrow button) and select
6 R e s e t
x N o /
(Enter button).
(Enter button).
(Enter
N o w
Y e s