Fujitsu FI-4860C Operator's Manual page 255

19. Setting of SCSI ID
1) Press (Next button) or
<Screen19>.
2) At <Screen19>, press
to select SCSI ID number.
The blinking item is the one selected.
HINT
3) Press (Enter button) and make the setting valid.
Press (Exit button) at the end and the LCD display goes back to [Ready]
screen.
Changed SCSI ID becomes valid after the scanner power is cycled.
HINT
(Previous button) and let LCD display
<Screen19>
! 1 9 S C
= 0 / 1 / 2
(Left arrow button) or press
S I I D
/ 3 / 4 / 5 /
(Right arrow button)
7.3 Setup Mode Details
7
6 / 7
7-49