Installing The Gbic Modules - Cisco WS-C2950T-48-SI Hardware Installation Manual

Chapter 2 Installation

Installing the GBIC Modules

Installing the GBIC Modules

Figure 2-25, Figure 2-26, and Figure 2-27 show how to insert a GBIC module in a GBIC module slot on
the switch. For instructions on how to install a CWDM GBIC module in a GBIC module slot, see the
documentation that came with that GBIC module.
For detailed instructions on installing, removing, and cabling the GBIC module (the 1000BASE-X
module, the 1000BASE-T module, the CWDM GBIC module, or the GigaStack module), refer to your
GBIC documentation.
Caution To prevent electrostatic-discharge (ESD) damage when installing GBIC modules, follow your normal
board and component handling procedures.
Figure 2-25 Installing a 1000BASE-X GBIC Module in a Switch
Metal flap door
C at al ys t 29
50
1
SE RIE S
2
GBIC module slot
1000BASE-X
GBIC module
Figure 2-26 Installing a 1000BASE-T GBIC Module in a Switch
Metal flap door
C at al ys t 29
50
1
SE RIE S
2
1000BASE-T GBIC module slot
GBIC module
Catalyst 2950 Switch Hardware Installation Guide
2-22
OL-6156-01