Cisco Catalyst WS-C2924-XL Hardware Installation Manual page 72

Connecting to DC Power
Figure 2-19 Crimping the Ground Lug
Use the two number-10-16 screws to attach the ground lug and wire assembly to
Step 6
the rear panel of the switch.
Using a ratcheting torque screwdriver, torque each ground-lug screw to 15 1bf-in.
Step 7
(or 240 ounce-force inches [240 ozf-in.]). (See
Catalyst 2900 Series XL Hardware Installation Guide
2-28
Chapter 2
Figure 2-20.)
Installation
78-6461-04