Color Mode; Input Adjustment - Epson EMP-TW 700 User Manual

Configuration Menu Functions
"Picture" menu

Color Mode

Seven different settings can be selected for the Color Mode, to match the images being projected or the
projection environment.

Input Adjustment

These settings can be adjusted if the output level from the connected equipment is weak and the images
appear dark. The two settings cannot be made simultaneously. You can only select one of them to be
adjusted.
White Level/Black Level
These adjust the dark and light areas of images
• White Level: Adjusts the brightness of bright shades without changing the black level.
• Black Level: Adjusts the brightness of dark shades without changing the white level.
Brightness/Contrast
Adjusts the overall brightness of the images.
• Brightness: The brightness of the images can be adjusted.
• Contrast:
Color Saturation
This adjusts the colour intensity for the images.
*2
Tint
(Adjustment is only possible when composite video and S-Video signals in NTSC format are being
input.)
This adjusts the image tint.
Sharpness
This adjusts the image sharpness.
Standard
The adjustment results are applied to the entire image.
Advanced
This can be used to adjust a specific region.
Color Adjustment
"Color Adjustment" cannot be selected when the colour mode is set to "sRGB ".
Abs. Color Temp.
This adjusts the overall tints of the images.
28
*1
p.18
*2
When the setting is changed to the - side, bright areas become clearer.
When the setting is changed to the + side, dark areas become clearer.
If projecting in dark rooms or onto small screens and the images appear too bright,
decrease the setting.
Adjusts the difference between bright and dark areas.
When the contrast is increased, images with greater modulation are obtained.
*2
*2
*2
*1 The setting values are stored separately for each image source and signal type.
*2 The setting values are stored separately for each image source and colour mode setting.
Displayed for input sources other than computer
p.23
p.20