Adjusting The Projection Screen; Focus Adjustment; Fine Adjustments To Image Size (Zoom Adjustment); Projection Image Position Adjustment (Lens Shift) - Epson EMP-TW 700 User Manual

Adjusting the Projection Screen

Focus adjustment

Turn the focus ring to adjust the
focus.
Projection image position adjustment
(Lens shift)
Use the two lens shift dials to adjust the
image position.
If you cannot position the projector straight
in front of the screen, use the lens shift dial
so that the image is centered on the screen.
When you turn the lens shift dial and hear a
click, the lens position is almost centred.
You can shift the image by 102% in the
vertical direction, and 50% in the horizontal
direction. However, you cannot shift the
image to these vertical and horizontal limits
simultaneously.
Ex) When the image is shifted horizontally
by the full amount, it cannot be shifted
vertically.
And when the image is shifted
vertically by the full amount, it cannot
be shifted horizontally by more than
10% of its width.
When transporting the
projector, make sure to turn
the lens position down by the
full amount. Otherwise the lens
shift function may be
damaged.
16
Focus adjustment
Fine adjustments to image size (Zoom
adjustment)
Projection image position adjustment
(Lens shift)
Fine adjustments to image size
(Zoom adjustment)
Turn the zoom ring to adjust the size of the
projected image.
Wide
Down
Up
Left
H
Standard (centre position for
projection position lens shift)
Range that the picture can be shifted
from the standard projection position
Tele
Right
V