EchoStar DVR-5000 HDD User Manual page 41

13. Save the recording as locked or hidden
a. use the key, to go to the Parental Lock;
b. read the available help text for information;
c. press the
d. press the OK key to activate the setting.
Note that a red bullet appears in selection.
14. Change the status:
a. use the key, to go to the Status;
b. read the available help text for information;
c. press the
15. Save the timer:
a. use the key, to go to the Store Settings;
b. read the available help text for information;
c. press the OK key to confirm the settings.
16. Note the clock that appeared in your program.
17. Do not forget to program also your VCR if you have
set a VCR timer.
NOTE
You cannot set a (EPG-based) timer in the past or on a
program that has already begun.
If the timer screen does not disappear, you have set a
timer in the past or for a running program. Revise
either date, start or stop time to a time in the future.
18. For a program that has already begun:
a. set the timer as usual and change the start time
to 00:00;
b. use the
c. press the OK key to confirm the settings.
19. Note that:
a. the DVR InfoBanner momentarily appears with a
red blinking indicator;
b. the display on the receiver shows Hdd.
EchoNAV User Interface
keys to select Lock or Hide;
keys to set the status;
key, to go to the Store Settings;
Operation
Section 5
Page 5 - 11
5