EchoStar DVR-5000 HDD User Manual page 13

34. Make the required selections.
35. Read the available help text for information.
36. Go to the Search Channels field.
37. On the RCU, press the OK key to advance.
38. Wait for the search to complete:
a. the receiver display shows a moving dot;
b. the search completed popup menu appears.
39. On the RCU, press the OK key to end the initial
setup procedure.
F
OR MOTORIZED INSTALLATIONS
CAUTION
On the motorized dish, set the physical East and West limit switches first. Failing to
do so might cause damage to your motorized dish installation or other properties.
21. Make the required selections.
22. Read the available help text for information.
Note that only the white fields are selectable, other
fields show reference information.
23. Go to the Set Limits field.
24. On the RCU, press the OK key to advance.
25. On the RCU:
a. press the key to set the East limit;
b. at the motor error, press the key once;
c. press the OK key.
26. On the RCU:
a. press the key to set the West limit;
b. at the motor error, press the key once;
c. press the OK key.
27. Go to the Program Satellites field.
28. On the RCU, press the OK key to advance.
EcoNAV User Interface
- M
ANUAL SELECTION
Installation
Section 3
Page 3 - 7
3