EchoStar DVR-5000 HDD User Manual page 40

Operation
Section 5
1. On the RCU, press the EPG key.
2. If EPG data is available, select a program in the
future (right of the red line in the EPG window);
3. If no EPG data is available, select the correct
channel.
4. Read the available help text for information.
5. On the RCU press the YELLOW key.
6. Select the required timer.
7. When the timer appears, if necessary:
8. Change the date:
a. use the key, to go to the Date;
b. read the available help text for information;
c. press the OK key to change the date;
d. in the calendar, select the required date;
e. press the OK key to return to the timer.
NOTE
Be aware that the shown EPG start/stop time might not
be the same as the actual start/stop times, because of
last minute program changes.
9. Change the start time:
a. use the key, to go to the Start Time;
b. read the available help text for information;
c. press the
d. press the OK key to go to the minutes;
e. press the
10. Change the stop time:
a. use the key, to go to the Stop Time;
b. read the available help text for information;
c. press the
d. press the OK key to go to the minutes;
e. press the
11. Change the repetition rate:
a. use the key, to go to the Period;
b. read the available help text for information;
c. press the
12. Save the recording in a specific (favorite) list:
a. use the key, to go to the Favorite List;
b. read the available help text for information;
c. press the
Page 5 - 10
keys to set the hours;
keys to set the minutes.
keys to set the hours;
keys to set the minutes.
keys to set the repetition.
keys to set the (favorite) list.
EchoStar International Corporation