Configuring Isdn Bri Lines; Isdn Bri Provisioning By Switch Type - Cisco 2620 Configuration Manual

Configuring ISDN BRI WAN Interface Cards
Table 3-6
Country
Australia
Europe
Japan
New Zealand
North America

Configuring ISDN BRI Lines

Before using a router with an ISDN BRI interface, you must order a correctly configured ISDN BRI line
from your local telecommunications service provider.
The ordering process varies from provider to provider and from country to country; however, here are
some general guidelines:
•
•
•
•

ISDN BRI Provisioning by Switch Type

ISDN BRI provisioning refers to the types of services provided by the ISDN BRI line. Although
provisioning is performed by your ISDN BRI service provider, you must tell the provider what you want.
Table 3-7
Software Configuration Guide for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers
3-12
ISDN Switch Types
ISDN Switch Type
basic-ts013
basic-1tr6
basic-nwnet3
basic-net3
vn2
vn3
ntt
basic-nznet3
basic-5ess
basic-dms100
basic-nil1
Ask for two channels to be called by one number.
Ask for delivery of calling line identification, also known as caller ID or Automatic Number
Identification (ANI).
If the router will be the only device attached to the ISDN BRI line, ask for point-to-point service
and a data-only line.
If you plan to connect another ISDN device (such as an ISDN telephone) to the ISDN BRI line
through the router, ask for point-to-multipoint service (subaddressing is required) and a
voice-and-data line.
lists the provisioning you should order for your router.
Chapter 3 Configuring with the Command-Line Interface
Description
Australian TS013 switches
German 1TR6 ISDN switches
Norwegian NET3 ISDN switches (phase 1)
NET3 ISDN switches (UK and others)
French VN2 ISDN switches
French VN3 ISDN switches
Japanese NTT ISDN switches
New Zealand NET3 switches
AT&T basic rate switches
NT DMS-100 basic rate switches
National ISDN-1 switches
OL-1957-04