Cisco 1601 - Router - EN Hardware Installation Manual page 139

Analog Modem WAN Interface Cards
Revised: 6/7/07, OL-12848-01
Overview
This document describes Cisco analog modem WICs and how to connect analog modem WICs to a
network. It contains the following sections:
•
•
•
•
•
•
For an overview of Cisco interface cards used for Cisco access routers see the
Cisco Access Routers
Analog Modem WICs
The analog modem WAN interface cards originate or terminate analog telephone transmissions through
RJ-11 modular jacks.
There are four analog modem WICs:
•
•
•
•
Analog Modem WICs, page 1
Analog Modem WIC LEDs, page 3
Understanding Interface Numbering on Analog Modem WICs, page 4
Connecting an Analog Modem WIC to a Network, page 4
Related Documentation, page 5
Obtaining Documentation, Obtaining Support, and Security Guidelines, page 6
document.
1-port analog modem WAN interface card (WIC-1AM) (see
2-port analog modem WAN interface card (WIC-2AM) (see
1-port analog modem WAN interface card, version 2 (WIC-1AM-V2) (see
2-port analog modem WAN interface card, version 2 (WIC-2AM-V2) (see
Cisco Interface Cards for
Figure 102)
Figure 103)
Figure 104)
Figure 105)
OL-12848-01
1