Chapter 11. System Management
Application
Netmeeting or VOIP
NEWS
PC Anywhere
PC Anywhere
POP3
Powwow Chat
Red Alert II
SMTP
Sudden Strike
TELNET
Win VNC
10.2.2 Virtual Server Example
Following describes the procedure to setup a FTP server:
1. Open the Virtual Server configuration page, as shown in Figure 10.3, by double clicking the
Advanced
Virtual Server menu.
2. Select FTP from the Enable drop-down list and the check the check box to activate this policy.
Note that the protocol and the redirect port range are automatically selected.
3. Enter the IP address of the FTP server. Note that this IP address is a private IP address.
4. Click
66
Service Port Numbers
1503-1503, 1720 (ALG)
TCP 119-119
TCP: 5631
TCP: 5631, UDP: 5632
TCP 110-110
13223-13223
1234-1237
TCP 25-25
2300-2400
TCP 23-23
UDP 5800-5900
to save the settings.
Figure 10.3. Virtual Server Example
RX3141 User's Manual