Table of Contents
Advertisement
RX3141 User's Manual
9.4.4
Display Inbound ACL Rules
To see existing inbound ACL rules, just open the Inbound ACL Rule configuration page by double clicking the
Router Setup
Inbound ACL menu. The existing inbound ACL rules are displayed at the bottom of the
configuration page.
9.5
Configuring Outbound ACL Rules
By creating ACL rules in outbound ACL configuration page as shown in Figure 9.5, you can control (allow or
deny) Internet or external network access for computers on your LAN.
Options in this configuration page allow you to:
Add a rule, and set parameters for it
Modify an existing rule
Delete an existing rule
View configured outbound ACL rules
9.5.1
Add an Outbound ACL Rule
To add an outbound ACL rule, follow the instructions below:
1. Open the Outbound ACL Rule configuration page, as shown in Figure 9.5, by double clicking the
Router Setup
2. Select " Add New " from the " ID " drop-down list.
3. Set desired action (Allow or Deny) from the " Action " drop-down list.
Figure 9.5. Outbound ACL Configuration Page
Outbound ACL menu.
Chapter 9. Configuring Firewall/NAT Settings
57
Advertisement
Table of Contents
