Table of Contents
Advertisement
Chapter 3. Quick Start Guide
5. In the Select Network Component Type dialog box, select Protocol , and then click <Add> button.
6. Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click <OK> button.
You may be prompted to install files from your Windows 2000 installation CD or other media. Follow
the instructions to install the files.
7. If prompted, click <OK> button to restart your computer with the new settings.
Next, configure the PCs to accept IP addresses assigned by the RX3141:
8. In the Control Panel, double-click the Network and Dial-up Connections icon.
9. In Network and Dial-up Connections window, right-click the Local Area Connection icon, and
then select Properties .
10. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP) , and then
click <Properties> button.
11. In the Internet Protocol (TCP/IP) Properties dialog box, click the radio button labeled Obtain an
IP address automatically . Also click the radio button labeled Obtain DNS server address
automatically .
12. Click <OK> button twice to confirm and save your changes, and then close the Control Panel.
3.2.4
Windows® 95, 98, and Me PCs
1. In the Windows task bar, click the <Start> button, point to Settings , and then click Control
Panel .
2. Double-click the Network icon.
In the Network dialog box, look for an entry started w/ " TCP/IP -> " and the name of your network
adapter, and then click <Properties> button. You may have to scroll down the list to find this entry.
If the list includes such an entry, then the TCP/IP protocol has already been enabled. Skip to step 8.
3. If Internet Protocol (TCP/IP) does not display as an installed component, click <Add> button.
4. In the Select Network Component Type dialog box, select Protocol , and then click <Add> button.
5. Select Microsoft in the Manufacturers list box, and then click TCP/IP in the Network Protocols
list, box and then click <OK> button.
You may be prompted to install files from your Windows 95, 98 or Me installation CD or other
media. Follow the instructions to install the files.
6. If prompted, click <OK> button to restart your computer with the new settings.
Next, configure the PCs to accept IP information assigned by the RX3141:
7. In the Control Panel, double-click the Network icon.
8. In the Network dialog box, select an entry started with " TCP/IP ->" and the name of your network
adapter, and then click <Properties> button.
9. In the TCP/IP Properties dialog box, click the radio button labeled Obtain an IP address
automatically .
10. In the TCP/IP Properties dialog box, click the " Default Gateway " tab. Enter 192.168.1.1 (the
default LAN port IP address of the RX3141) in the " New gateway " address field and click <Add>
button to add the default gateway entry.
11. Click <OK> button twice to confirm and save your changes, and then close the Control Panel.
12. If prompted to restart your computer, click <OK> button to do so with the new settings.
14
RX3141 User's Manual
Advertisement
Table of Contents
