Adding Static Routes; Figure 7.2. Static Route Configuration - Asus RX3141 User Manual

RX3141 User's Manual
7.2.2

Adding Static Routes

Follow these instructions to add a static route to the routing table.
1. Open the Static Route configuration page by double clicking the Advanced
menu.
2. Enter static routes information such as destination IP address, destination subnet mask, gateway
IP address and the interface in the corresponding fields.
For a description of these fields, refer to Table 7.1. Static Route Configuration Parameters.
To create a route that defines the default gateway for your LAN, enter 0.0.0.0 in both the Destination
IP Address and Subnet Mask fields.
3. Click

Figure 7.2. Static Route Configuration

to add a new route.
Chapter 7. Configuring Static Routes
Static Route
41