Table of Contents
Advertisement
RX3141 User's Manual
2. Click on the
from the " ID " drop-down list.
3. Make desired changes to any or all of the following fields: action, source/destination IP,
source/destination port, protocol, ICMP message type and log. Please see Table 9.3 for
explanation of these fields.
4. Click on the
then be displayed in the outbound access control list table at the bottom half of the Outbound
ACL Configuration page.
9.5.3
Delete Outbound ACL Rules
To delete an outbound ACL rule, just open the Outbound ACL Rule configuration page by double clicking the
Router Setup
Outbound ACL menu and then click on the
9.5.4
Display Outbound ACL Rules
Open the Outbound ACL Rule configuration page by double clicking the Router Setup
menu.
9.6
Configuring Self-Access ACL Rules – (Router Setup
Self-Access rules control access to/from the RX3141 itself. You may use Self-Access Rule Configuration page,
as illustrated in Figure 9.8, to:
Add a Self-Access rule
Modify an existing Self-Access rule
Delete an existing Self-Access rule
View existing Self-Access rules
icon of the rule to be modified in the outbound ACL table or select the rule number
button to modify this ACL rule. The new settings for this ACL rule will
Chapter 9. Configuring Firewall/NAT Settings
in front of the rule to be deleted:
Self-Access ACL)
Outbound ACL
59
Advertisement
Table of Contents
