802.1X Settings - TRENDnet TEW-310APB User Manual

802.1x Settings

1. Enable 802.1x security by clicking the "802.1X Function" checkbox.
2. If MD5 EAP methods is used then you can skip step 3 and go to step 4.
3. Select the Encryption Key Lifetime from 5 Minutes to 1 Day. As soon as the lifetime of the
Encryption Key is over, the Encryption Key will be renewed by the Radius server.
4. Select the Length ranging from 64 to 256 Bits that you would like to use for Encryption Key
Length.
5. RADIUS Server 1: Enter the IP address of and the Port used by the Primary Radius Server
Enter the Shared Secret , which is used by the Radius Server.
6. RADIUS Server 2: Enter the IP address of, Port and Shared Secret used by the Secondary
Radius Server.
7. Click "Apply" button for the 802.1x settings to take effect after Access Point reboots itself.
Note! As soon as 802.1x security is enabled, all the wireless client stations that are connected to the
Access Point currently will be disconnected. The wireless clients must be configured manually to
authenticate themselves with the Radius server to be reconnected. Please refer to Appendix C for
detail 802.1x setup and installation.
-40-