TRENDnet TEW-310APB User Manual page 22

data throughput. However, the Short Preamble is supported only from the IEEE 802.11b (High-Rate)
standard and not from the original IEEE 802.11. That means that stations using Short-Preamble
cannot communicate with stations implementing the original version of the protocol.
Basic Rate: The basic transfer rate is set depending on the speed of your wireless network. For
example, you set 1-2 (Mbps) if you have older 802.11 compliant device in your network, which
supports 1 ~ 2 Mbps data rate. This setting does not limit the basic transfer rates of the faster
802.11 compliant network devices.
Antenna Selection: To set the antenna for transmitting data. The default setting is Diversity
Antenna, which is better for reception.
SSID Broadcast: While SSID Broadcast is enabled, all wireless clients will be able to
communicate with the Access Point. For security purpose, you may want to disable SSID
Broadcast to allow only those wireless clients with the AP's SSID to communicate with the Access
Point.
4X Mode : When "4X enable" is selected, you will be running 22Mbps PBCC+4X mode, the
wireless transmission speed can achieve over 12Mbps real throughput assuming that the wireless
client device is also running 22Mbps PBCC+4X.
: 4X mode is proprietary transmission mode available only with our solution chipset. In
Note !
order to achieve superb speed by 4X or 22Mbps PBCC mode, both the transmitting and receiving
parties must be using our WLAN solution products.
-22-